1533 results found

1. "Light Table" mode: Continued high CPU usage

   See Update #1, 2025-01-16 below.
   See Update #2, 2025-01-16 below.

   When using the latest version of Bridge (15.0.2.432) I have noticed that sometimes Bridge has a continued (very) high CPU usage for no reason. I can replicate this 100% (system details below):

   1. start Bridge

   2. enter "maximized" mode for the Bridge app window (so that the Bridge window fills the whole screen)

   3. enter "Filmstrip" mode

   4. go to a folder with more than around 40 images (see below *)
         (I have tested this with both small JPEGs and with large TIFFs, see also about filters below)

   5. Bridge may or may not generate thumbnails and/or previews (does not matter for this bug/problem)

   6. wait until the CPU usage for Bridge falls to its idle level (around 0.1% in my case)

   7. now enter "Light Table" mode

   8. at first nothing happens

   9. cover part or the whole Bridge windows with another app (I used the Task Manager when experimenting)

   10. then bring the Bridge window to the front, so that the Bridge window is fully exposed again (letting the Bridge window get focus)

   11. almost immediately I observe a very high CPU usage level (see attached screen dumps of Task Manager)

   12. while this is going on I can see no disk activity at all generated by Bridge. Bridge seems to consume CPU resources for no apparent reason. This goes on (forever) until another screen mode (like back to "Filmstrip) is selected or Bridge exit.

   *) during my experiments I noticed that when the number of images shown in "Light Table" mode is equal to or less than 36, everything works normal (no high CPU usage). When the number of images shown in "Light Table" mode is greater or equal to 38 however, the high CPU usage occurs.

   Note that normal (low) CPU usage is observed BOTH when the total number of images in the folder is less than 36 OR if filters are applied before entering "Light Table" mode that results in less than 36 images shown on the screen when going to "Light Table" mode (no high CPU usage even with a folder with a large number of images if filters limit the number of images shown).

   This makes Bridge almost unusable in "Light Table" mode (sluggish, PC fans accelerating).

   ---

   Other pending problems:
   https://community.adobe.com/t5/bridge-discussions/bridge-keeps-regenerating-cached-thumbnails/m-p/14732534 
   https://community.adobe.com/t5/bridge-discussions/generate-monitor-size-previews-wrong-size-generated/m-p/15081010 

   • Bridge version 15.0.2.432
   • Windows 11 Pro, version 24H2, OS build 26100.2605
   • Nvidia RTX 2020, Studio driver, Version 566.36

   See Update #1, 2025-01-16 below.
   See Update #2, 2025-01-16 below.

   When using the latest version of Bridge (15.0.2.432) I have noticed that sometimes Bridge has a continued (very) high CPU usage for no reason. I can replicate this 100% (system details below):

   1. start Bridge

   2. enter "maximized" mode for the Bridge app window (so that the Bridge window fills the whole screen)

   3. enter "Filmstrip" mode

   4. go to a folder with more than around 40 images (see below *)
         (I have tested this with both small JPEGs and with large TIFFs, see also about filters below)

   5. Bridge may or may not generate… more

   •  

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  PERFORMANCE  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

2. bridge folder tree messed up

   Unless in full screen, the folder link tree looks like this. Totally unusable. I have to find the correct folder via finder and drag it to bridge.

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  FOLDER PANEL  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

3. Which is the Best OST to PST converter to download?

   The best OST to PST converter to download depends on the features you need, but one of the top-rated tools is the FRT Freeware OST to PST Converter. This tool is highly recommended due to its:

   Key Features:

   1. Batch Conversion: Convert multiple OST files to PST format at once.
   2. Maintains Data Integrity: Preserves the original folder structure, emails, attachments, and metadata.
   3. User-Friendly Interface: Easy to navigate, making it ideal for both beginners and experienced users.
   4. Quick and Reliable: Fast processing time without compromising data quality.
   5. Free Trial: Allows you to test the software before committing to a purchase. (https://www.filesrecoverytool.com/ost-converter.html)

   This OST converter tool ensures a smooth and efficient OST to PST conversion, making it one of the best options available.

   The best OST to PST converter to download depends on the features you need, but one of the top-rated tools is the FRT Freeware OST to PST Converter. This tool is highly recommended due to its:

   Key Features:

   1. Batch Conversion: Convert multiple OST files to PST format at once.
   2. Maintains Data Integrity: Preserves the original folder structure, emails, attachments, and metadata.
   3. User-Friendly Interface: Easy to navigate, making it ideal for both beginners and experienced users.
   4. Quick and Reliable: Fast processing time without compromising data quality.
   5. Free Trial: Allows you to test the software before committing to a purchase. (https://www.filesrecoverytool.com/ost-converter.html… more
   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  INSTALL  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

4. Cannot shift Capture Time by more than 24 hours, 59 minutes, and 59 seconds

   I copied about 200 photos to my Mac from a camera whose date and time were exactly 1088 days, 3 hours, 21 minutes, and 28 seconds behind the correct date and time. I discovered that the user interface to set the "Date Time Original" field in the Exif metadata only allows the user to adjust the time on a batch of photos by a maximum of 24 hours, 59 minutes, and 59 seconds. I had to adjust the batch of photos by 3 hours, 21 minutes, and 28 seconds, and then tediously go through and change the date on each and every photo individually by 1088 days. The user interface should have a field where the user can also specify a number of days to shift, or failing that, a much larger number of hours (in my case, 1088 days x 24 hours, or 26,112 hours).
   (MacBook Pro 16-inch Nov 2023, Sequoia 15.2, Bridge 15.0.2.432)

   I copied about 200 photos to my Mac from a camera whose date and time were exactly 1088 days, 3 hours, 21 minutes, and 28 seconds behind the correct date and time. I discovered that the user interface to set the "Date Time Original" field in the Exif metadata only allows the user to adjust the time on a batch of photos by a maximum of 24 hours, 59 minutes, and 59 seconds. I had to adjust the batch of photos by 3 hours, 21 minutes, and 28 seconds, and then tediously go through and change the date on each… more

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  EDIT CAPTURE TIME  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

5. Cannot open video from Content panel to full-screen preview

   When a video clip, say a .mp4 file, is selected from the list in my Content panel, and I hit spacebar to play it in full-screen mode, nothing happens. This is on my MacBook Pro 16-inch Nov 2023 running Sequoia 15.2.

   I can work around this by selecting a static image, say a .jpg file, that is also in the list in my Content panel, hit spacebar to display it in full-screen mode, and then use the up-arrow or down-arrow to get to the .mp4 file. The video then plays in full-screen mode as expected.

   (MacBook Pro 16-inch Nov 2023, Sequoia 15.2, Bridge 15.0.2.432)

   When a video clip, say a .mp4 file, is selected from the list in my Content panel, and I hit spacebar to play it in full-screen mode, nothing happens. This is on my MacBook Pro 16-inch Nov 2023 running Sequoia 15.2.

   I can work around this by selecting a static image, say a .jpg file, that is also in the list in my Content panel, hit spacebar to display it in full-screen mode, and then use the up-arrow or down-arrow to get to the .mp4 file. The video then plays in full-screen mode as expected.

   (MacBook Pro 16-inch Nov 2023,… more

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  FULL SCREEN MODE  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

6. Magnifying glass tool shows weird facetted-effect

   Versions of Adobe Bridge: v14.0.3, v15.0.0
   Operating Systems: macOS Monterey 12.7.6, macOS Sonoma 14.7.2

   When using the magnifying glass in preview-window on small images (i.e. 640x400px) it shows a wrong facetted-effect.

   I used Bridge CS6 on El Capitan before - there the magnifying-glass-window was always correctly filled completely with the selected magnification as shown in the attached screenshots.

   It's reeeeally annoying when using it for detail research on several images with different sizes.

   •  

   •  

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

7. AV1 Encoded Videos Crash Bridge When Selected

   Adobe Bridge is crashing when selecting any AV1 encoded video files.
   Thumbnails are not generated either.

   Running:
   CPU: Intel 12700k
   GPU: Intel B580

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  CRASH  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

8. Keyword error

   If the keyword assigned to the file contains the Turkish characters "ş ve ğ", these files are not found when written in the search box. I wrote to you before, but no one cared. This problem exists in all your cc versions. I have been experiencing this problem for about 10 years and that is why I have to use the bridge cs6 version. This error does not exist in your macos versions. It only exists in windows versions. I tried it in windows 7,8,10 and 11 and it gave an error. It has nothing to do with the operating system. I think it is caused by an overlooked error in the bridge language files. I currently have the latest version installed, but the same error still occurs. I have thousands of files. If the keywords of these files contain the letters "ş ve ğ", it does not find these words when I search for them. Your customer representatives have connected remotely many times and could not find a solution to the problem. They accepted the problem and suggested that I write it in this section. I kindly ask you to make an update on the subject. Please take care of this problem now. The reason this problem has not been noticed before is that there are no "ş ve ğ" characters in English. No one from Turkey has noticed the problem. If you try, you will easily notice this problem. Assign the keywords "öğrenci" or "eşek" to the file and type these words into the search box and search. You will see that there is a problem.

   If the keyword assigned to the file contains the Turkish characters "ş ve ğ", these files are not found when written in the search box. I wrote to you before, but no one cared. This problem exists in all your cc versions. I have been experiencing this problem for about 10 years and that is why I have to use the bridge cs6 version. This error does not exist in your macos versions. It only exists in windows versions. I tried it in windows 7,8,10 and 11 and it gave an error. It has nothing to do with the operating… more

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  LABELS AND KEYWORDS  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

9. folder not showing up

   I just updated Bridge to version 15.0.1.412. Then I copied a folder of recent negative scans to this computer and opened where the folder should be but couldn't find it in Bridge. I tried moving it around, changing folder properties like sharing to everyone and removing "read only" but I still can't find it. I then created a new folder in Bridge but it didn't show up in Windows File Explorer. I copied a file from the folder Bridge couldn't see to one that it could see (using File Explorer), then checked inside and Bridge doesn't see the file. Very strange. I can edit the files by dragging them into Photoshop from File Explorer but the problem just seems to be with Bridge. Does anyone know what I'm doing wrong, or is it a Bridge Bug?

   I just updated Bridge to version 15.0.1.412. Then I copied a folder of recent negative scans to this computer and opened where the folder should be but couldn't find it in Bridge. I tried moving it around, changing folder properties like sharing to everyone and removing "read only" but I still can't find it. I then created a new folder in Bridge but it didn't show up in Windows File Explorer. I copied a file from the folder Bridge couldn't see to one that it could see (using File Explorer), then checked inside and Bridge doesn't see the file. Very… more

   1 vote

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  FILE SYSTEM OPERATIONS  ·  Edit…  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

10. When renaming folders, renaming hangs after the 2nd or 3rd single renaming operation

    When creating a series of folders, the naming process hangs after 2nd or 3rd operation. While the new folder is established, it keeps the default German name (Neuer Ordner), but cannot be renamed.

    Bridge version: 15.0.1.412

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

11. Secure Method to Convert Emails From Outlook PST into Adobe PDF

    We all know that Microsoft Outlook is one of most popular email client, which stores all the mailbox data including emails, contacts, calendars, notes, etc into PST file format. If you want save or print this data into Adobe PDF then you need to convert PST file to PDF format.
    Although users can convert PST file to PDF format manually but this method is quiet exhausting and time consuming, if you have large number of emails to convert into PDF. Moreover, manual method is not enough to convert corrupted , damaged or bulk PST file.
    To avoid any such restrictions of manual method, users can make use of reliable EmailsGuru PST to PDF Converter. This tool allow users to convert emails or entire PST file to PDF format with attachments. This tool preserves the all email formatting and data integrity throughout the conversion process. It is fully safe and easy way to convert all the data from Outlook PST into PDF format. It is fully compatible with all versions of Outlook and Windows Operating Systems.
    Know more- https://www.emailsguru.com/pst/pdf/

    We all know that Microsoft Outlook is one of most popular email client, which stores all the mailbox data including emails, contacts, calendars, notes, etc into PST file format. If you want save or print this data into Adobe PDF then you need to convert PST file to PDF format.
    Although users can convert PST file to PDF format manually but this method is quiet exhausting and time consuming, if you have large number of emails to convert into PDF. Moreover, manual method is not enough to convert corrupted , damaged or bulk PST file.
    To avoid any such restrictions… more

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  FILE INFO  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

12. Bridge develop settings copy-paste broken 15.01.412

    After I enabled extended Ai settings, when I copy and paste develop settings from a raw file to another, the settings don't get applied. I tried many times and I could only paste the settings in camera raw not from bridge. I was focused on the spot removal tool so my main issue was to copy spot removal settings from photos with the same lens. Disabling the new Ai features from camera raw settings seemed to solve the issue.

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  CAMERA RAW  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

13. view at 100% images blurry

    Images edited in Photoshop, then saved as JPGs are unsharp when viewed at 100% in Bridge 15.0.1.412. 100% previews saved in cache.
    Purging cache temporarily eliminates the problem, then editing another image results in a repeat of the same issue. Purging cache again clears the problem.
    Images are typically saved at 6K.
    I haven't seen this issue with previous versions of Bridge.

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  THUMBNAILS AND PREVIEWS  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

14. Bridge does not open large externar disks

    I have a Terramaster with many 16tb disks. Most of time this cannot be opened. I see the little circle spinning but It cannot open the content of those disks. If I delete preferences I can open them but in a few days it happens again. With any other program I have no problem to open those large disks like ACDSEE or PhotoMechanic so it is an Adobe Bridge problem. It has been going for very long now with no solution

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  PERFORMANCE  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

15. Collections Don't Work on New PC

    My Bridge 2025 Smart Collections don't work on my new pc, but they work perfectly on my old pc. Both pc's are win 11. I have done the following:
    - Created new collections on new pc. They don't work.
    - Exported/Imported keywords from old to new pc
    - Copied files from old pc Collections folder into new pc Collections folder. They still don't work.
    - Compared Preferences in old/new pc. They are identical.

    Any suggestions, please?

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

16. Bridge 2025 shows all pictures - not only the rated ones even though selected

    When I rate my pictures (one, two... stars) and select (for example) "show two or more stars" Bridge 2025 keeps showing all pictures - which makes using this version useless for me. With Bridge 2024 works as expected.

    •  

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

17. selection after opening in camera raw is one off

    Bridge Version 15.0.0.397 on Windows 11

    • Select a consecutive group of images
    • Right-click. Open in Camera Raw
    • Edit in Camera raw
    • Press "Done" in Camera Raw to exit

    Observe: Selection is now shifted one to the right: The first is unselected, the next one following the original selection is included in the selection.

    Expected: Same selection as I started with.

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  CAMERA RAW  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

18. panning in slide

    Panning in slide show, zoomed in to 100% or 200%, the image gets blurred and never refocuses again. This is very frequent, >40%. Workaround is to change to another image and then back.

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  SLIDESHOW  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

19. slide show zoom

    Zoom into 100% or 200% in slide show often zooms in to the wrong coordinates. It is a frequent issue > 50%. When this happens, then it is 100% repeatable until I close the slide show.

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  SLIDESHOW  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

20. rating

    unable to rate photos while in the culling process. IT will work for one photo and then stop working all together on the rest of the photos. some memory cards it allows me to rate & others I am unable to get anything rated. I've restarted my computer tried multiple things and nothing. I have not experienced this until the recent update

    1 vote

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Edit…  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close